General Question

susanc's avatar

Why can't I get a signal any more?

Asked by susanc (16139points) October 4th, 2008

We switched to AT&T because they were working off a closer cell tower than our previous service. They claim there’s been no cell tower change since there was some “repair work” in July. But while they were doing the “repair work”, my phone stopped working (at my house) and it’s never started working again. What’s going on? They claim they don’t know.

Observing members: 0 Composing members: 0

4 Answers

PIXEL's avatar

Maybe you should buy a new phone.

sndfreQ's avatar

Sometimes the issue may lie with your cell phone’s SIM card and its connection to the phone itself. A cheap trick for troubleshooting that connection is to take a pencil eraser and to rub the SIM card’s copper/gold terminals (remove the SIM card from the socket of the cell phone first of course!)

Rub gently to remove oxidation or other accumulation (dust). Then reinsert the SIM card and check the contact points with where it connects to the phone (if possible). It may also be possible to “exercise” that connection if your SIM card sits inside a slot or tray-bottom line, an improperly seated SIM card may affect reception. Also, I have actually had my SIM card replaced by AT&T by visiting them in-store (they shouldn’t charge you if you argue that the SIM may be faulty). This has worked for me in the past where a newer SIM card actually connected to the networked more effectively (not sure how exactly, but the service rep said it does).

susanc's avatar

Thank you sndfreQ. I did make them give me a new one. Nothing happened. Now what? (actually I’m going to do the thing with the eraser.)

Pixel, do you mean this? Like, if I had a different physical phone, the signal would pick up better? I’ve asked other people to see if their phones get a signal and they don’t – not at
my house.

JohnRobert's avatar

If you go to a physical AT&T store, such as in a mall, they can enter your home address in their computer and show you the towers near your area and the signal strenth. They did this for me when I was dropping calls and I went in to complain. It literaly looks like a Google map with but with shaded areas that show different colors for the various signal strengths. Turned out I was in a weak area.

Answer this question

Login

or

Join

to answer.

This question is in the General Section. Responses must be helpful and on-topic.

Your answer will be saved while you login or join.

Have a question? Ask Fluther!

What do you know more about?
or
Knowledge Networking @ Fluther